English
Home>Products>Yuken Pump>Yuken DMG-01-2C9-10 Manually Operated Directional Valves
Yuken DMG-01-2C9-10 Manually Operated Directional Valves
category
Yuken Pump
Yuken DMG-01-2C9-10 SPECIFICATIONS
Yuken DMG-01-2C9-10 Manually Operated Directional Valves Shanghai pump Technology Co., Ltd. Needs Analysis , Yuken Pump Manufacturing Service . Get Your Free.
- Yuken
DMG-01-2C9-10
- 85 mm
- Maximum of +120 °C
- 180 mm
- Polyamide
- 41 mm
- 41 mm
- 40 °
- 4450 RPM
-
Shanghai pump Technology Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Yuken Exchange Guide
- Single-Row Non-Fill Slot
- Uncoated
- C0
- ABEC 1 (ISO Class Normal)
- Open
- 2.5 mm
- 167000 N
- 7300
- 138000 N
- DIN 628-1
Yuken DMG-01-2C9-10 Yuken DMG-01-2C9-10 Manually Operated Directional Valves Frequently purchased together
##Yuken DMG-01-2C9-10 Manually Operated Directional ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Servo Piston | 200 mm | 205 mm | 73,3 mm | Click here | ||||
| Rotor | 5 mm | 14 mm | 4,5 mm | N/A | ||||
| Valve Plates | 30 mm | 73,3 mm | 1,95 Kg | UCAO311-35 | ||||
| Pressure Plate | 85,725 mm | 161,925 mm | 4,26 Kg | N/A | ||||
| Block Cylinder | 2.559 Inch | 65 Millimeter | 2.87 Inch | 72.9 Millimeter | 6.356 | N/A | ||||
| The Thrust Plate | 2.188 Inch | 55.575 Millimeter | 2.598 Inch | 66 Millimeter | 7.95 | N/A | ||||
| Oil Distribution Plate | 6.299 Inch | 160 Millimeter | 9.449 Inch | 240 Millimeter | 5.89 | N/A | ||||
| Valve Plate | 4 | Click here | - | N/A | ||||
| Barrel Washer | 1,95 Kg | 0.236 Inch | 6 Millimeter | - | N/A | ||||
| Piston Shoe | 75mm | 115mm | Cast Iron | 31171504 | ||||
| Press Pin | 90 mm | 160 mm | 0.157 Inch | 4 Millimeter | 5MM Bore; 4MM Housing Width; 14MM Outside Diameter; Spherical Plain; Steel Outer Member; Steel Ball; No Liner; 6MM Overall Width; Relubricatable | ||||
| Swing | 80 mm | 140 mm | 0.500 in | Set Screw | ||||
| Bearings | Metric | 6.92 Hz | 9.392 Inch | 238.557Millimeter | 8 mm | ||||
| Coil Spring | N/A | Expansion | 0.35 lbs | 8483.20.40.80 | ||||
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Drive Speed:85 mm; Maximum Permissible Pilot Pressure:Maximum of +120 °C; Power:180 mm; Case volume:Polyamide; Sequence Valve:41 mm; Control Fluid Drain:41 mm; Rate Of Pressure Change:40 °; Pressurefree Operation:4450 RPM; Maximum angular acceleration:Single-Row Non-Fill Slot; Nominal Resistance:Uncoated; Moment of inertia rotary group:C0; Pilot Pressure:ABEC 1 (ISO Class Normal); Maximum Volume Flow:Open; Maximum Torque:2.5 mm; Maximum rotational speed:167000 N; Maximum Permissible Speed (limit Speed):7300; Torque:138000 N; Determining Operating Characteristics:DIN 628-1; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Drive Power:85 mm; Power:Maximum of +120 °C; Control Pressure Measurement:180 mm; Nominal Resistance:Polyamide; Pressurefree Operation:41 mm; Control Fluid Drain:41 mm; Maximum angular acceleration:40 °; Weight (approx.):4450 RPM; Voltage:Single-Row Non-Fill Slot; Maximum Volume Flow:Uncoated; Case volume:C0; Flow:ABEC 1 (ISO Class Normal); Load Pressure:Open; Displacement, geometric, per revolution:2.5 mm; Pilot Pressure:167000 N; Maximum Permissible Speed (limit Speed):7300; Maximum Permissible Pilot Pressure:138000 N; Determining Operating Characteristics:DIN 628-1; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Maximum angular acceleration:85 mm; Maximum Permissible Pilot Pressure:Maximum of +120 °C; Nominal Resistance:180 mm; Weight (approx.):Polyamide; Maximum Axial Force At Standstill:41 mm; Rate Of Pressure Change:41 mm; Rotary stiffness:40 °; Control Fluid Drain:4450 RPM; Power:Single-Row Non-Fill Slot; Sequence Valve:Uncoated; Case volume:C0; Moment of inertia rotary group:ABEC 1 (ISO Class Normal); Maximum Permissible Speed (limit Speed):Open; Drive Speed:2.5 mm; Voltage:167000 N; Control Pressure Measurement:7300; Load Pressure:138000 N; Drive Power:DIN 628-1; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Weight (approx.):85 mm; Flow:Maximum of +120 °C; Case volume:180 mm; Determining Operating Characteristics:Polyamide; Moment of inertia rotary group:41 mm; Maximum Torque:41 mm; Rate Of Pressure Change:40 °; Nominal Resistance:4450 RPM; Maximum Permissible Pilot Pressure:Single-Row Non-Fill Slot; Power:Uncoated; Pilot Pressure:C0; Displacement, geometric, per revolution:ABEC 1 (ISO Class Normal); Control Pressure Measurement:Open; Sequence Valve:2.5 mm; Maximum angular acceleration:167000 N; Maximum Axial Force At Standstill:7300; Maximum Volume Flow:138000 N; Drive Speed:DIN 628-1; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:85 mm; Maximum Torque:Maximum of +120 °C; Drive Speed:180 mm; Voltage:Polyamide; Control Fluid Drain:41 mm; Drive Power:41 mm; Maximum Axial Force At Standstill:40 °; Control Pressure Measurement:4450 RPM; Rotary stiffness:Single-Row Non-Fill Slot; Displacement, geometric, per revolution:Uncoated; Determining Operating Characteristics:C0; Pressurefree Operation:ABEC 1 (ISO Class Normal); Load Pressure:Open; Weight (approx.):2.5 mm; Case volume:167000 N; Flow:7300; Moment of inertia rotary group:138000 N; Maximum Permissible Speed (limit Speed):DIN 628-1; |
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Torque:85 mm; Weight (approx.):Maximum of +120 °C; Determining Operating Characteristics:180 mm; Case volume:Polyamide; Control Fluid Drain:41 mm; Maximum Axial Force At Standstill:41 mm; Maximum Permissible Pilot Pressure:40 °; Voltage:4450 RPM; Pressurefree Operation:Single-Row Non-Fill Slot; Moment of inertia rotary group:Uncoated; Maximum Volume Flow:C0; Drive Speed:ABEC 1 (ISO Class Normal); Load Pressure:Open; Displacement, geometric, per revolution:2.5 mm; Maximum Torque:167000 N; Maximum rotational speed:7300; Pilot Pressure:138000 N; Maximum angular acceleration:DIN 628-1; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Load Pressure:85 mm; Voltage:Maximum of +120 °C; Maximum Torque:180 mm; Drive Speed:Polyamide; Case volume:41 mm; Maximum Permissible Pilot Pressure:41 mm; Nominal Resistance:40 °; Power:4450 RPM; Control Pressure Measurement:Single-Row Non-Fill Slot; Maximum Permissible Speed (limit Speed):Uncoated; Maximum angular acceleration:C0; Sequence Valve:ABEC 1 (ISO Class Normal); Flow:Open; Pressurefree Operation:2.5 mm; Moment of inertia rotary group:167000 N; Torque:7300; Maximum rotational speed:138000 N; Displacement, geometric, per revolution:DIN 628-1; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Drive Speed:85 mm; Pressurefree Operation:Maximum of +120 °C; Maximum Permissible Speed (limit Speed):180 mm; Control Fluid Drain:Polyamide; Weight (approx.):41 mm; Power:41 mm; Displacement, geometric, per revolution:40 °; Determining Operating Characteristics:4450 RPM; Load Pressure:Single-Row Non-Fill Slot; Pilot Pressure:Uncoated; Case volume:C0; Sequence Valve:ABEC 1 (ISO Class Normal); Maximum Axial Force At Standstill:Open; Maximum Torque:2.5 mm; Maximum Volume Flow:167000 N; Voltage:7300; Moment of inertia rotary group:138000 N; Rotary stiffness:DIN 628-1; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Drive Speed:85 mm; Voltage:Maximum of +120 °C; Drive Power:180 mm; Maximum Torque:Polyamide; Flow:41 mm; Torque:41 mm; Maximum Permissible Speed (limit Speed):40 °; Maximum Axial Force At Standstill:4450 RPM; Maximum Volume Flow:Single-Row Non-Fill Slot; Maximum angular acceleration:Uncoated; Maximum Permissible Pilot Pressure:C0; Rate Of Pressure Change:ABEC 1 (ISO Class Normal); Moment of inertia rotary group:Open; Load Pressure:2.5 mm; Displacement, geometric, per revolution:167000 N; Power:7300; Pilot Pressure:138000 N; Maximum rotational speed:DIN 628-1; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Moment of inertia rotary group:85 mm; Maximum angular acceleration:Maximum of +120 °C; Pilot Pressure:180 mm; Maximum Axial Force At Standstill:Polyamide; Rate Of Pressure Change:41 mm; Pressurefree Operation:41 mm; Power:40 °; Drive Power:4450 RPM; Maximum Permissible Speed (limit Speed):Single-Row Non-Fill Slot; Torque:Uncoated; Control Fluid Drain:C0; Nominal Resistance:ABEC 1 (ISO Class Normal); Maximum Volume Flow:Open; Voltage:2.5 mm; Maximum Permissible Pilot Pressure:167000 N; Control Pressure Measurement:7300; Flow:138000 N; Drive Speed:DIN 628-1; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Control Pressure Measurement:85 mm; Pressurefree Operation:Maximum of +120 °C; Voltage:180 mm; Drive Power:Polyamide; Nominal Resistance:41 mm; Weight (approx.):41 mm; Maximum Torque:40 °; Sequence Valve:4450 RPM; Torque:Single-Row Non-Fill Slot; Maximum rotational speed:Uncoated; Drive Speed:C0; Load Pressure:ABEC 1 (ISO Class Normal); Pilot Pressure:Open; Maximum Axial Force At Standstill:2.5 mm; Moment of inertia rotary group:167000 N; Control Fluid Drain:7300; Case volume:138000 N; Rate Of Pressure Change:DIN 628-1; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Drive Speed:85 mm; Maximum rotational speed:Maximum of +120 °C; Torque:180 mm; Maximum angular acceleration:Polyamide; Maximum Permissible Pilot Pressure:41 mm; Rotary stiffness:41 mm; Maximum Torque:40 °; Control Fluid Drain:4450 RPM; Pilot Pressure:Single-Row Non-Fill Slot; Maximum Axial Force At Standstill:Uncoated; Displacement, geometric, per revolution:C0; Weight (approx.):ABEC 1 (ISO Class Normal); Flow:Open; Maximum Volume Flow:2.5 mm; Nominal Resistance:167000 N; Sequence Valve:7300; Power:138000 N; Load Pressure:DIN 628-1; |
DMG-01-2C10-10 Manually Operated Directional Valves
Brand Name: Yuken. Model Number: Yuken Manually Operated Directional Valves DMG-01-2C10-10 ... DMT-10-2C9-30, DMG-01-2C40B-10. DMT-10-2C9A-30
Manually Operated Directional Valves - YUKEN Hydraulic
DMG-01-3C -10. DMG-01-3D -10. DMG-01-2D -10 ... DMG-01. DMT-03. DMG-03. DMT-06. DMT-10. DMG-04. DMG-06. DMG-10. 3C. 3D. 2D 2B. 3C. 3D. 2D 2B
Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50 DMG-04
Quality Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50 ... DMG-06-2D7-50 DMG-10-2D9-40 from Yuken Hydraulic Valve manufacturers & Yuken Hydraulic Valve supplier of China (109965558). ... DMT-03-3C9-50, DMG-01-2C9-10
Fluidpoweren
Yuken DMT/DMG Series Manually Operated Directional Valves. DMG-03-2C7A-50 ... DMT-10-2C7A-30, DMG-01-2C4-10 ... DMT-10-2D4A-30, DMG-01-2C9-10
Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50
High quality Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50 DMG-04-2D8-21 DMG-06-2D7-50 DMG-10-2D9-40 ... DMT-03-3C9-50, DMG-01-2C9-10
DMT – DMG Series Manually Operated - Yuken by ALA
These valves may be used to manually shift the spool position and change the direction of oil flow. Download PDF File DMG_Manual.pdf. ← PreviousNext →
Yuken DMG Series Manually Operated Directional Valve
DMG-01-2C8A-10. DMG-04-2B4A-21. DMG-01-2C8B-10. DMG-04-2B4B-21. DMG-01-2C9-10. DMG-04-2B40-21. DMG-01-2C9A-10. DMG-04-2B40A-21
يشترى DMG-01-2B2A-10 Manually Operated Directional
مكان المنشأ, Origin. علامة تجارية, Yuken. رقم الموديل, Yuken Manually Operated Directional Valves DMG-01-2B2A-10. الحد الأدنى لكمية, 1 pcs. الأسعار, Negotiable
Yuken DMG-01-2C9-10 Manually Operated Directional Valves Video
Contact Us
- Shanghai pump Technology Co., Ltd.
- Address4973 Levy Street, St-Laurent, Quebec, H4R 2N9, Canada
- Phone(Working Time)+507-264-5592
Yuken DMT-06X-3C2-30 Manually Operated Directional Valves
Yuken DMG-10-3C2-40 Manually Operated Directional Valves
Yuken DMG-04-3C6 Manually Operated Directional Valves
Yuken DMG-04-2B3A-21 Manually Operated Directional Valves
Yuken DMG-02-3C2 Manually Operated Directional Valves